Recommended scanner settings
The following settings should be configured in the device settings of the scanners.
Datalogic Memor 1 / Joya Touch A6
Settings - Scanner settings - Notification
Good read audio mode: None
Turn this off so there will be no 'good read' feedback when the barcode is not actually inputted into the Tix Scan App). This will avoid confusion, eg the box employee keeps scanning while the barcode is actually not inputted into the Tix Scan App.
Settings - Scanner settings - Formatting
Label prefix: None
Label suffix: [LF]
Group separator: [GS]
Settings - Scanner settings - Wedge
Enable keyboard wedge: Yes
Keyboard wedge only on focus: No
Keyboard wedge input mode: Key pressure
Enable intent wedge: Yes
Settings - Sound & notification
Media volume: Loud
By turning the media volume up, you will hear the feedback sound of the Tix Scan App better, so you know if the scan was good or not.
The setup of Wepoy S95 is identical with other scanners, but looks different in some older Android versions.
Under settings, you get the possibility to log in with your Google account, and log in to Mobile network. This is not necessary to scan tickets in Tix.
- Make sure the scanner has a connection to wifi. The network should be an own dedicated network so others will not use the same bandwith and capacity of the network. This may interfere with the scanning.
- Swipe down top to bottom to get to the settings.
Press the wheel to get to the rest of the settings.
- Screen: Set Sleep mode to 30min or Never
- Click Scanner Settings and set the following settings:
Important: Read more about the 3 Triggering Modes here:
Triggering Modes will affect scanning and how scanning will be done when you press one of the three big scan buttons.
- Triggering Modes can be chosen with your own preferences.
Host is used if the scan user are able to scan when the button is pressed.
Pulse is used this way: Press the button and the scan function is activated, and will scan automatically when the scanner locates a barcode or qr-code.
Continuous should not be used, as it will draw a lot of energy from the battery.
- You can also set scanning sounds if you wish.
- Scanner sounds can be edited here as well:
- Set the correct date and time:
FAQ errors with scanning
Scanning is slow
The scanner can "hang" on a wifi-access point, which does not give the best coverage or range.
Solution: Turn Wifi off, on again and reconnect.
Solution: Close the app and restart it.
Solution: Restart the scanner,.
Scanning not registrered
It might be that you hear sound or vibration, but the scanner does not scan.
Solution: Turn off wifi and turn it on again to reconnect.
No response on scanner
Check internet connection. Even though you are logged into the app, and checked the connection where you got the scanner, it does not necessairly mean you have internet at the entrance you scan.
Solution: Open a browser and try an internet page you have not cached on the scanner. Restart the wifi to reconnect.